.URUKUST SMOOTH LEATHER 1.6mm  / SAND BEIGE
.URUKUST SMOOTH LEATHER 1.6mm  / SAND BEIGE
.URUKUST SMOOTH LEATHER 1.6mm  / SAND BEIGE
.URUKUST SMOOTH LEATHER 1.6mm  / SAND BEIGE
MATERIALS / LEATHER SHEETS

.URUKUST SMOOTH LEATHER 1.6mm / SAND BEIGE

These are .URUKUST original leather sheets that are perfect for making leathercraft. They are vegetable-tanned cowhide with a smooth finish and are moderate elastic, with few wrinkles on the surface. The leather hides are 1.6mm thick, easy to handle when making a wide range of products from small items to big bags. The flesh side has been treated to get rid of the fluff.

SIZE

As shown in the figure, each piece is 60cm wide. The length is enough to use without the edge part. The edges are not cut off when they're delivered.

L: approx. 90 x 60 cm
M: approx. 80 x 60 cm
S: approx. 60 x 60 cm

*Size and parts may vary.

leather size

GRADE

Depending on the individual material, there may be scratches, uneven colors, stains, holes, etc. They are graded according to their condition.

Grade A

Very clean overall, but may be slightly wrinkled, or have very small scratches and uneven coloring.

Grade B

Some scratches, wrinkles, and uneven coloring is visible.

Grade C

Scratches, deep wrinkles, and uneven coloring is visible throughout the material.

CAUTION

In rare cases, wax from the tanning process crystallizes and causes white residue called "bloom" to appear. In this case, brush or wipe the leather with a dry cloth. It will help shine the leather. Because leather is a natural product, it contains inherent flaws such as scars or uneven color. When the product is left out in the open, sunlight or room light may fade the surface color. If water is applied, it may cause discoloration or stains, and it may bleed on your clothes.

Due to computer monitors displaying colors differently, we cannot guarantee that the color you see accurately portrays the true color of the product. Please understand the actual color may vary slightly from what appears on your screen.

DETAIL

Material
Steer hide (Japan)
Tanner
Japan
Tanning process
vegetable
Thickness
1.6mm (may vary slightly depending on the spot)
Flesh side treatment
Treated (to reduce fluffing on the flesh side)
Dye
Not through (Dyeing the edges is recommended as they are in its natural color.)
- .URUKUST SMOOTH LEATHER -
This cowhide is tanned using vegetable tannins. .URUKUST original leather is produced after extensive discussions with tanners. It has a smooth finish with few wrinkles or creases on the surface. This is firmer than .URUKUST CLASSIC LEATHER, but the wax rubbed into the leather will soften the leather and add luster over time.